“What you think, you become. What you feel, you attract. What you imagine, you create.” ―
superconscious
“What you think, you become. What you feel, you attract. What you imagine, you create.” ― Buddha
Three parts of the mind
When discussing the mind, there are three basic areas to consider: the conscious mind, the subconscious mind, and the superconscious mind.
If you do not wish to use iTunes to upgrade or downgrade iOS on your devices for some reason, 3uTools is one of the alternatives.
Before starting the upgrade / downgrade, backup all the data on your device. Once done, proceed with the below steps:
1. Download & install 3uTools
2. Turn OFF Find My iPhone
3. Connect device to PC
4. Launch the 3uTools on your PC
5. Navigate to Smart Flash and select Easy Flash / iTunes Flash
6. Click Download or Import if you already have the firmware on your PC
7. Select Retain User's Data, Quick Flash Mode or Anti-Recovery Flash
※ Quick Flash Mode
This mode is suitable for maintenance staff, sales clerk and ordinary users to achieve these goals: update iOS version quickly; clear user data, restore to factory state or try to repair iOS version.
※ Retain User’s Data
This mode is only used to update the iOS version or try to repair the iOS version. All installed applications and user data in the iDevice will be preserved.
※ Anti-Recovery Flash
This mode is suitable for people who want to sell their own iDevice or want to destroy the private data inside the iDevice. Because each memory unit of the hard disk chip in the iDevice need to be formatted, the flashing speed will be very slow and take up to several hours.
Samsung phones are some of the few phones that can be easily flashed with an older version of the operating system. All you need is access to a computer and you can get your device downgraded.
Before starting the downgrade, backup all the data on your device. Once done, proceed with the below steps:
1. Download & install Samsung USB Driver
2. Download & extract Odin
3. Download & extract firmware
4. Boot device to Download Mode (Power OFF device - press & hold volume up + volume down while connecting the device to PC - press volume up)
5. Launch the Odin Tool on your PC. The ID COM section should be highlighted and should display a port number as well (This signifies that the tool was able to recognize your device)
6. Load the BL, AP, CP, and CSC files to Odin
7. Navigate to Options and check Auto Reboot and F.Reset Time
8. Hit the Start button and wait for the process to complete (PASS)
There was a blind girl who hated herself just because she was blind. She hated everyone, except her loving boyfriend. He was always there fo...